Touchstone FHIR Testing
2.0.0 - current
Touchstone FHIR Testing
2.0.0 - current
Touchstone FHIR Testing v2.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions
| Active as of 2023-06-29 |
Definitions for the testscript-operation-protocol extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Touchstone TestScript operation testscript-operation-protocol extension for use within the TestScript.setup.action.operation and TestScript.test.action.operation elements. The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request. If present, this protocol overrides the default protocol for the given operation.type code value. This extension is valid for all operations. |
| Short | The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request. |
| Control | 0..1 |
| Is Modifier | false |
| 2. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://touchstone.aegis.net/touchstone/fhir/testing/StructureDefinition/testscript-operation-protocol |
| 4. Extension.valueCode | |
| Binding | Unless not suitable, these codes SHALL be taken from AEGIS Touchstone Testing TestScript Operation Protocol Codes ValueSet |
| Type | code |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Touchstone TestScript operation testscript-operation-protocol extension for use within the TestScript.setup.action.operation and TestScript.test.action.operation elements. The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request. If present, this protocol overrides the default protocol for the given operation.type code value. This extension is valid for all operations. Optional Extension Element - found in all resources. |
| Short | The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request.Optional Extensions Element |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://touchstone.aegis.net/touchstone/fhir/testing/StructureDefinition/testscript-operation-protocol |
| 4. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators: |
| 6. Extension.value[x]:valueCode | |
| Slice Name | valueCode |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see AEGIS Touchstone Testing TestScript Operation Protocol Codes ValueSet |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Touchstone TestScript operation testscript-operation-protocol extension for use within the TestScript.setup.action.operation and TestScript.test.action.operation elements. The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request. If present, this protocol overrides the default protocol for the given operation.type code value. This extension is valid for all operations. |
| Short | The testscript-operation-protocol extension defines the message protocol to be used in sending or evaluating the sent operation request. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators: |
| 6. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://touchstone.aegis.net/touchstone/fhir/testing/StructureDefinition/testscript-operation-protocol |
| 8. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | code |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators: |
| 10. Extension.value[x]:valueCode | |
| Slice Name | valueCode |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from AEGIS Touchstone Testing TestScript Operation Protocol Codes ValueSet |
| Type | code |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |